Elatech EFT system is offered in zinc coated or stainless steel teeth with either embedded tooth or total tooth design.
The application of profiles in different materials from the belt body (steel, polyamide, POM, wood, etc.) and in virtually any dimension is possible. The belt tooth is replaced by a false tooth in stainless steel.
Available in galvanized or stainless steel for applications in the pharmaceutical machines or humid and aggressive environments. The EFT system allows the application of very high loads (higher than those applied when using traditional cleats).
Main advantages:
- Self-centering: EFT-cleats positioning accuracy is greater than the value obtained through the use of traditional welded cleats.
- Economic: it allows to replaceement of a single element instead of the entire belt and to reduce downtime of the machine.
- Versatile: it allows the application of cleats in virtually any material and size.
EFT belts are available with the profiles AT10, ATK10, AT20, XH and H, in two executions:
- Total Tooth Design: the polyurethane tooth is entirely replaced by a steel tooth;
- Embedded Tooth Design: it prevents metal to metal contact and reduces noise.
Versions of the EFT and ATF mechanical fastening system
AT10 Profile | H | Width 25mm
TAS154 false tooth | embedded
Characteristics
- Embedded tooth, stainless steel
- Ensures smoother system operation
- Partially embedded in the belt, preventing direct metal-to-metal contact
AT10 Profile | H | Width 25mm
TAS729 false tooth
Characteristics
- All-metal tooth, stainless steel
- Construction, replaces the entire belt tooth
- Features 2 threaded holes
AT10 Profile | Width 32mm
TAS210 false tooth
Characteristics
- All-metal tooth, stainless steel
- Construction, replaces the entire belt tooth
- Features 2 threaded holes
H Profile | Width 38mm
TAS854 false tooth
Characteristics
- All-metal tooth, stainless steel
- Construction, replaces the entire belt tooth
- Features 2 threaded holes
AT10 Profile | H 2'' | Width 50mm
TAS150 false tooth
Characteristics
- All-metal tooth, stainless steel
- Construction, replaces the entire belt tooth
- Features 2 threaded holes
AT10 Profile | Width 75mm
TAS155 false tooth
Characteristics
- All-metal tooth, stainless steel
- Construction, replaces the entire belt tooth
- Features 3 threaded holes
AT20 Profile | XH | Width 50mm
TAS158 false tooth | embedded
Characteristics
- Embedded tooth, stainless steel
- Ensures smoother system operation
- Partially embedded in the belt
- Up to 4 inserts possible in line
AT20 Profile | XH | Width 50mm
TAS142 false tooth | embedded
Characteristics
- Ensures smoother system operation
- Features two threaded holes
- Partially embedded in the belt, preventing direct metal-to-metal contact
ATF10 Profile | ATF20 Profile
false tooth | embedded
Characteristics
Innovative ATF technology:
Mounting holes (cavities) are integrated into each tooth of the base timing belt, enabling precise installation of the inserts. This makes the ATF timing belt particularly suitable for:
- Positioning applications
- Conveyor applications
Configure your belt with our tools
ElaDrive software allows you to calculate the correct belt for your application.
